Dealer and quantity discounts available
Cart 0
Round EVA Power Knob for Fin-Nor OffShore Ahab Sportfisher Spinning Reels

Round EVA Power Knob for Fin-Nor OffShore Ahab Sportfisher Spinning Reels


 New Light Weight Round Black EVA Power Knobs For Most High End Fresh Water & Saltwater Spinning Reels. 

Handle Blank is NOT Included.


These Knobs are extremely comfortable & lightweight.  They come in 3 sizes: 41mm, 44mm & 47mm.  The knobs do NOT contain bearing but 2 bearing sets are available from my eBay store at a very affordable price.

Please keep in mind that the Power Knob must be attached to your existing reel handle.  A handle blank is NOT included in this purchase.  However, if you prefer to purchase a complete Power Handle assembly, I have handle blanks for a variety of many popular bait casters and high end spinning reels.  I am offering these complete handles on eBay.

Prior to your purchase, please read the notes below to ensure successful installation.

Attaching the EVA Knob to the Handle Blank:

The knob has an internal pin that will pass thru the handle blank on your reel.  There is a screw that goes into the pin which is used to attach the knob to the reel handle blank.  The exposed part of the internal pin is about 3mm long.   Most reels have a handle blank thickness of at least 4 to 5mm so the exposed pin is longer enough but still will not extended past the handle blank.

Furthermore, the diameter of the pin used on the round knob is 6mm (.236").  After the rivet is removed, enlarge the hole using a size "B" drill bit (.238").  The handle blank must have enough 'meat' to support this larger hole and have place for the base of the 11mm (.43”D) stem.

To attach the knob to the handle blank, you must first remove the top cap of the knob.  
Using 2 screw drivers, remove the bottom screw assembly from within the internal pin.  


Note:  The bottom screw may be LEFT Handed!  Place a small amount of Loctite Blue 242 into the opening of the internal pin and on the threads of the screw.  

Attach the  screw thru the handle blank hole into the pin. With 2 screw drivers, tighten the pin from both the top and bottom. Replace the top cap.


Mounting Screws May Be LEFT HANDED!

If Needed, Installation Notes Available Upon Request

Sales Tax: CA Residents Pay Sales Tax.


Share this Product