New Light Weight 9 degree Articulated Molded Plastic T-Bar KNOB & Handle Blank For PENN Int'l 20, 30, 50, 30VW & 50VW Reels
To attach the knob to the handle blank:
To attach the new T-Bar knob to the handle blank, remove the 2 small phillips screws and face plate from the top of the knob. This will expose a slot in the pin for a screw driver. Unscrew the phillips screw from the bottom of the knob using a second screw driver from the top of the knob. Leave the washer on the exposed pin. Use blue Loctite 242 inside the pin when attaching the pin to the handle blank to secure the screw. Insert the small aluminum ring into the handle blank.
Attach the Philips head screw thru the handle blank into the knob. With the normal screw driver inserted into the top of the pin to prevent rotation, tighten with both screw drivers. Then replace the face plate and 2 small screws.
If Needed, Installation Notes Available Upon Request
Sales Tax: CA Residents Add Sales Tax.