Dealer and quantity discounts available
Cart 0
Handle w/ 45mm for Penn Int'l 965 & 955 BaitCaster Reels - See NOTE Inclosed

Handle w/ 45mm for Penn Int'l 965 & 955 BaitCaster Reels - See NOTE Inclosed


New Light Weight Round Power Handle For Penn Int'l 955 & 965 BaitCaster Reels.

NOTE: Please be aware I have been recently advised by one of my customers that the drive shaft of some of the older 965/955 reels may not perfectly fit my handle blank that i provide for the 965/955 handle. The holes on the handle blank are a bit too narrow. however, my customer has used a small file to enlarge the hole(s), a simply task he has advised.

45mm - 1.77" Round Black Aluminum Knob - Includes 2 Ball Bearing.

Proper Installation Requires the Use of Loctite BLUE 242.

Attaching the Knob to the Handle Blank:

Note:  The bottom screw is LEFT Handed!

To attach the knob to the handle blank, you must

remove the bottom screw and small washer from the internal shaft.

  Place a small amount of Loctite Blue 242 into the opening of the internal shaft and on the threads of the bottom screw.  Let the Locite set for about an hour. 

Attach the screw together with the small washer thru the handle blank hole into the shaft. 

In the event the knob rotation is either too loose or too tight, you may adjust the tension on the knob rotation by removing the top cap and adjusting the screw in the knob cavity.


If Needed, Additional Installation Notes Are Available Upon Request

Sales Tax: CA Residents Pay Sales Tax.

Share this Product

More from this collection