Handle with Knob for Shimano TALICA 8, 10, 12, 16, 20 & 25 Two Speed Reels.
Some Talica reels were equipped with handle blanks which are not compatible with all Talica ii models. In order to be compatible with all Talica ii reels, I have adapted my handle blanks with a thin washer which may or may not be required in order to enable my handle blanks to be installed on your reel.
45mm - 1.77" Round Black Aluminum Knob - Includes 2 Ball Bearing.
Proper Installation Requires the Use of Loctite BLUE 242.
Attaching the Knob to the Handle Blank:
Note: The bottom screw is LEFT Handed!
To attach the knob to the handle blank, you mustremove the bottom screw and small washer from the internal shaft.
Place a small amount of Loctite Blue 242 into the opening of the internal shaft and on the threads of the bottom screw. Let the Locite set for about an hour.
Attach the screw together with the small washer thru the handle blank hole into the shaft.
In the event the knob rotation is either too loose or too tight, you may adjust the tension on the knob rotation by removing the top cap and adjusting the screw in the knob cavity.
If Needed, Additional Installation Notes Are Available Upon Request
Sales Tax: CA Residents Pay Sales Tax.