EVA Power Knob fits PENN Battle & Sargus Spinning Reels
New Light Weight Round EVA Power Knob For Many PENN Saltwater Spinning Reels
Conquer, Slammer, Spinfisher SSM,
Spinfisher SSG, Battle, Sargus, Fierce, Pursuit
Handle Blank is NOT Included.
You are bidding for ONE new Round EVA Foam Power Knob. This aluminum/EVA knob, 1.61" (41mm) in diameter, is extremely light weight and incredibly comfortable. The knob comes in BLACK only.
Please keep in mind that the Power Knob must be attached to your existing reel handle. A handle blank is NOT included in this purchase.
Prior to your purchase, please read the notes below to ensure successful installation.
The knob has an internal pin that will pass thru the handle blank on your reel. There is a screw that goes into the pin which is used to attach the knob to the reel handle blank. The exposed part of the internal pin is about 3mm long. Most reels have a handle blank thickness of at least 4 to 5mm so the exposed pin is longer enough but still will not extended past the handle blank.
Furthermore, the diameter of the pin used on the round knob is 6mm (.236"). After the rivet is removed, enlarge the hole using a size "B" drill bit (.238"). The handle blank must have enough 'meat' to support this larger hole and have place for the base of the 11mm (.43”D) stem.
Attaching the Knob to the Handle Blank
Note: The bottom screw is LEFT Handed!
To attach the knob to the handle blank, you must first remove the top cap of the knob.Using 2 screw drivers, remove the bottom screw assembly from within the internal pin.
Note: The bottom screw is LEFT Handed! Place a small amount of Loctite Blue 242 into the opening of the internal pin and on the threads of the screw.
Attach the screw thru the handle blank hole into the pin. With 2 screw drivers, tighten the pin from both the top and bottom. Replace the top cap.
If Needed, Installation Notes Available Upon Request
Sales Tax: CA Residents Add Sales Tax.