Fishing Reel Parts. Round and T Bar Reel Handles, Round and T Bar Reel Knobs for most fishing reels including Shimano, Penn, Daiwa and Abu Garcia We also offer a large selection of fishing gear and supplies including tackle bags, boxes and cases, lures, jigs and baits, hooks, leaders and rigs, saltwater rods.
DIRECT Replacement 45mm KNOB for Older Stella FA, Stradic F1 & Sustain FE Reels
Direct Replacement - NO Drilling Needed
Round Aluminum Knob For Shimano Spinning Reels Fit Many of the Following Models:
Stella FA Series 4000 thru 20000
Stradic F1 Series 1000 thru 5000
Sustain FE Series 1000 thru 8000
45mm - 1.77" Round Black Aluminum Knob - Includes 2 Ball Bearing.
Handle Blank is NOT Included & NOT Needed. Proper Installation Requires the Use of Loctite BLUE 242.
Attaching the Knob to the Handle Spindle:
with the bearing at the bottom of the the new knob, place the new knob onto the spindle. VERY IMPORTANT - Place a small amount of Loctite Blue 242 into the threaded opening of the spindle Then remove the top cap of the knob new knob and remove the small phillip screw from within the cavity. Again - VERY IMPORTANT - Place a small amount of Loctite Blue 242 on the threads of the phillips screw. Let the Locite set for about an hour.
Then insert the screw into the
knob cavity thru the top bearing and into the spindle. Tighten the
screw down all the way until the knob no longer rotates. DO NOT OVER
TIGHTEN - Then back of the screw slightly permitting the knob to start
rotating freely. The Loctite will prevent the screw for further
loosening or tightening. If needed, the knob can easily be removed as
Loctite 242 Blue is NOT permanent.
