Dealer and quantity discounts available
Cart 0
DIRECT Fit KNOBS w/ 2 Bearings fit Many Shimano (Type "B") Spinning Reels

DIRECT Fit KNOBS w/ 2 Bearings fit Many Shimano (Type "B") Spinning Reels

$13.95

New other (see details)
KNOB will fit reels with spindle characteristics as indicated in the description shown below. Please read carefully!


Direct Replacement - NO Drilling Needed

Includes 2 Ball Bearings

 Direct Replacement Knobs For Shimano Saltwater Spinning Reels Fit Many of  the Following Models:


Shimano Reels:

Japanese Models-
  • Curado 300 (H, Type J) : Jigger LD 2 speed : Dendo-maru, (Motor Powered) : 2008 Stella SW4000XG-20000PG : Bull's Eye XT.  
US Models-
  • Stella SW 5000-20000, 2009 TwinPower SW 4000XG-12000XG.


Prior to your purchase, please read the notes below to ensure successful installation.

IMPORTANT NOTE:

In order to determine if the replacement knob will fit your model reel, you must first remove the knob attached to you reel.  If the knob can not be remove simply with a screw driver, the replacement knob can NOT be installed on your reel handle.

After removing the knob on your reel, you must inspect the spindle to confirm the following characteristics.

1. The tip of the spindle accepts a small screw.

2.  The base of the spindle will accept a 5mm ID diameter Ball Bearing.

3.  The spindle shaft diameter is 5mm maximum.

4.  The length of the spindle shaft is between 34.5mm and 37mm.

Please feel free to contact me if you have a reel spindle which does not conform to the 4 points shown above.  I still may be able to provide you with knob for your reel.

For example, if your spindle diameter is between 4.5mm & 5mm and the spindle length is greater than 30mm, chances are good that i have a knob for your reel.

Handle Blank is NOT Included & NOT Needed.

Attaching the Knob to the Handle Spindle:

Proper Installation Requires the Use of Loctite BLUE 242.

Prior to the installation of the knob, the original knob must be removed from the reel handle. The removal of the original knob as well as the installation of the new knob requires the simple use of only a Phillips screw driver and Loctite 242 Blue, nothing more.

 

If Needed, Additional Installation Notes Are Available Upon Request
 
Sales Tax: CA Residents Pay Sales Tax.

Share this Product


More from this collection