Molded T-Bar Knob fits Penn Int'l 30S 50S 30SW 50SW 30T 50T 30TW 50TW Reels
New Light Weight 9 degree Articulated
Molded Plastic T-Bar KNOB
For PENN Int'l 30S, 30SW, 30T, 30TW,
50S, 50SW, 50T, 50TW
NOTE: Handle Blank NOT Included.
To attach the knob to the original Penn handle blank:
To attach the new T-Bar knob to the handle blank, remove the 2 small phillips screws and face plate from the top of the knob. This will expose a slot in the pin for a screw driver. Unscrew the phillips screw from the bottom of the knob using a second screw driver from the top of the knob. Leave the washer on the exposed pin. Use blue Loctite 242 inside the pin when attaching the pin to the handle blank to secure the screw. Insert the small aluminum ring into the handle blank.
Attach the Philips head screw thru the handle blank into the knob. With the normal screw driver inserted into the top of the pin to prevent rotation, tighten with both screw drivers. Then replace the face plate and 2 small screws.
Sales Tax: CA Residents Add Sales Tax.