Dealer and quantity discounts available
Cart 0
SG 4" Gold T-Bar w/ Black Handle Fits Shimano Calcutta 700, TE300 & TE400 Reels

SG 4" Gold T-Bar w/ Black Handle Fits Shimano Calcutta 700, TE300 & TE400 Reels


 Incorporates a 9 Degree Off-Set T-Bar Knob. 

This permits the optimal alignment of your wrist, forearm, elbow and shoulder, resulting in maximum power and minimum fatique.  Includes 2 ball bearings

NOTE:  BLACK Handle Blank is Included.

Fits the following Shimano Star Drag Saltwater Reels

Tld 5, 10, 15, Tld Star, Speedmaster, Charter Special (Request Special Nut Plate)

Torium 14 thru 30, Tekota 300 thru 600

Trinidad 12 thru 30, Calcutta 700, TE300 and TE400,

Tranx 200 thru 500

You are bidding on a new T-Bar Power Handle.  The complete handle includes an aluminum handle blank and knob and weighs about 3 oz. The knob is constructed of 6061 Aluminum and incorporates a ball bearing in the shaft.  This hollow aluminum knob is extremely light weight and incredibly comfortable.   It is about 4" long and about 1" in diameter.  The 6061 aluminum handle blank is about 3.75" in length.  This is longer than the original handle blank.  This extra length provides for additional torque.   Handle blank is GOLD; the knob is GOLD.  

To attach the knob to the handle blank: 

Unscrew the cap from the large end of the knob. The shaft is detached from the knob by removing the small allen screw from inside the knob.  Then separate the knob from the shaft.  Remove the small plug from the top of the shaft.  This will expose a slot in the pin for the second screw driver.  Attach the shaft to the handle blank using 2 screw drivers.  Then reverse the procedure to reassemble.  You should use blue Loctite 242 when attaching the knob shaft to the handle blank to secure the screw.

Mounting Screws May Be LEFT HANDED!

If Needed, Installation Notes Available Upon Request

Sales Tax: CA Residents Pay Sales Tax.

Share this Product