Direct 36mm Knob with 2 Bearing For Daiwa Saltiga Saltist Certate Tatula Reels

Fits Many of the Following Models, to Name a Few!10 15 Saltiga 3500-4000      17 Saltiga BJ 3500-4000      Saltiga BJ 2500-4000Saltist Back Bay 3000 4000      Saltist 2500-4000      19 SALTIST BACK BAY LT 2500 3000 4000Certate LT 2500-5000      EXIST LT 1000 - 4000     EXCELER LT 1000 - 4000      FUEGO LT 1000 - 4000      Ballistic EX LT 1000 - 4000      Caldia 1000-6000      Tatula LT 1000-4000      Catalina 3500-4000Lexa LT 2500-6000      BALLISTIC LT 1000-6000     Ballistic EX LT 1000 - 4000Freams LT 1000-6000      Tournament ISO Z 3000     Tournament ISO 2500-3000

Prior to your purchase, please read the notes below to ensure successful installation.IMPORTANT NOTE:In order to determine if the replacement knob will fit your model reel, you must first remove the knob attached to you reel.  If the knob can not be remove simply with a screw driver, the replacement knob can NOT be installed on you reel handle.After removing the knob on your reel, you must inspect the spindle to confirm the following characteristics.1. The tip of the spindle accepts a small screw.2.  The base of the spindle will accept a 5mm ID diameter Ball Bearing.3.  The spindle shaft diameter is 4mm maximum.4.  The length of the spindle shaft is between 27.5mm and 28mm.Please feel free to contact me if you have a reel spindle which does not conform to the 4 points shown above.  I still may be able to provide you with knob for your reel.These Knobs are extremely comfortable & lightweight, about 1oz. Attaching the Knob to the Handle Spindle:Proper Installation Requires the Use of Loctite BLUE 242.Prior to the installation of the knob, the original knob must be removed from the reel handle. The removal of the original knob as well as the installation of the new knob requires the simple use of only a Phillips screw driver and Loctite 242 Blue, nothing more. If Needed, Additional Installation Notes Are Available Upon Request Sales Tax: CA Residents Pay Sales Tax.